EMC/EMI SMART CanBus Digital Replacement Balast 35W for D4R D4S bulbs
- Size: 85*65*30mm
- AC Digital with SMART CANBUS function
- Voltage: 9 - 16V
- Starting current: 5.5A 13.5V
- Steady current: 13.5V 3.1A
- Power: 35W
- Op. temp.: -40℃+ 105℃
- Waterproof , Shockproof, Dual EMC/EMI Anti-Electronic Interference and Constant Power Output.
REPLACEMENT XENON HID BALLAST FOR D4S D4R BULBS HID GAS DISCHARGE
This is a replacement 12v 35w Digital CanBus ballast with a D4 connector.
Will replace standard ballasts if they fail on your car.
You can now replace your faulty factory OEM ballasts with our aftermarket ballasts.
The oryginal OEM factory ballast will cost over £100 from a main dealer!
We supply the 2 power wires, all you need to do is connect the positive and negative wire to the socket where your old ballast come off from to power the ballast
This is a standard equipment on many modern cars. It is a computerised system that monitors and checks any faults that may arise, eg. if a bulbs fails an error massage appears on the dashboard.
And error massage may occur when a standard bulbs is replaced by an LED bulb.
